Kombi Kabin

KOMBI KABINS - Add a Room Tents are made with water resistant, fire resistant nylon Ripstop fabric (70D 1.9 OZ.). Each KOMBI KABIN also includes three large mosquito netting windows and a large back door, so entrance is accessible from either inside or the rear of your VW Bus Kombi. Setup of your KOMBI KABIN takes less than 5 minutes!

PLATFORM IS NOT INCLUDED BUT EASY TO BUILD WITH SIMPLE TOOLS

Parts needed to complete the platform – Available at your local hardware store for around $40

4x – Carabiner
2x – 40″ inch chains
2x – Threaded hooks
2x – Threaded Couplers to connect hooks and Eye Bolts
2x – Short Threaded Eye Bolts to attach to hooks
2x -Longer Threaded Eye Bolts to secure at rear edge of platform
4x – Large Diameter Washers for the longer Eye Bolts
2x – Butterfly Nuts for connecting the longer Eye Bolts to the plywood
Wood stain if desired
Some sandpaper to soften the cut edges of the ply…NO splinters!
1x – 48″ x 48″ plywood 5/8″ cut to fit your setup – our cut for a full width style setup was  34″ x 47 7/8″ to fit into buses 48″ hatch opening
1x – 40″ piece of 1″x 3″ to use on inside edge of platform as a bump stop when slid out